5 Tips in Preventing Frozen Pipes
A frozen pipe is a plumbing problem that should be taken care of immediately. Leaving your pipes frozen will make it more prone to bursting. Seek help from your local plumber if you’re having trouble with frozen pipes. You can use a hair dryer to heat the pipes while waiting for the plumber to arrive. It’s not advisable to use a blowtorch or other powerful heating tools. The reason for this is that the pipes can be heavily damaged from the heat. Dealing with a frozen pipe is inconvenient and costly. Prevent frozen pipes from happening with these tips:
1. Insulate your pipes before the cold becomes full-blown
You should already start insulting the pipes before the cold weather sets in. This will give you plenty of time to prepare and make adjustments. Insulation is a basic yet effective method to heat the pipes. There are various insulation supplies that you can use. Foam and insulation duct tapes are widely used. You need to make sure that the sizing of the tapes and foams fit the pipes perfectly. Since you have already been insulating pipes, you should also insulate some of your plumbing fixtures — especially the water heater. Pipes that are connected to the water heater can be affected by the cold temperature. Just make sure you don’t cover the entire water heater. Some parts like the vents and temperature relief valve need to have an opening. Consult your plumber for a better and safer insulation.
2. Let your faucet drip
This is definitely a strange way to keep your pipes from freezing. After all, letting the faucet drip is a waste of water and increases your water bills. So why must the faucet drip? You see, a pipe that has water flow is less prone to freezing than pipes that don’t have any movement. Dormant water in the pipes will just freeze over time. Stick with the insulation method if you don’t like letting your faucets drip.
3. Keep the cabinet doors open
To be more specific, we’re referring to pipes that are located under the sink. These locations are usually covered with cabinets. The pipes will have a difficult time being insulated if it gets covered with the cabinet. Opening the cabinet will allow the warm air to enter the sink and insulate the pipes.
4. Set-up a heating cable
If you live in a frigid location, you may need more than insulation items. Insulation blankets and foams are effective but it may not be enough. Heating cables help ensure that the pipes will be warm during the winter time. This particular equipment is very effective in heating outdoor pipes. Water lines that are in crawlspaces should also be insulated with the use of a heating cable.
5. Foundation should be enclosed
Many homeowners often forget that the pipes in the foundation also need to be insulated. For houses that are built with a crawlspace, you need to block off air that’s entering through it. Gaps in the foundation should be filled with insulation foams to heat the pipes behind it.