• 0402 290 290
  • 24 Hour Emergency Service

5 Ways to Lessen Your Water Bill

plumber granville 5 Ways to Lessen Your Water Bill

It is always a household problem when the homeowner is spending more for the water bill over the weekly or monthly upkeep of the plumbing system. There are homeowners that do not want to spend more on the plumbing system than what they absolutely have to. In some homes, 13% of the overall bill is intended for the water consumption. If your aim is to save up on the bill, your best course of action is to minimise your water bill. Here are effective ways to do so:

1. Hot Water Conservation

This is the best and the most effective means of cutting your bills. Conserving and minimising the usage of hot water goes a long way in keeping your water bills at a minimal. The utility bill is definitely determined by how often and how much the family demands and uses hot water. Remember that taking a hot shower certainly fairs better in your campaign to lessen you water bill than filling a tub with warm water to soak in a bath. Make sure that you do not overstay in the shower though since it is still easy to use the same amount of water and electricity as the filling a tub to its brim when you stay too long under the water spray.
There may be times when you will need to recycle your wastewater into a useful resource instead of dumping it into the sewage directly after a single use. It also helps to consider the use of hot water. For instance, is it necessary to use hot water in doing the laundry? There are chores where you do not necessarily have to use heated water thus, effectively saving energy and electricity.

2. Lower Temperature

Another way to lessen the bill is to lower your temperature setting in the water heater. Doing this will not overuse your heating system because the higher the temperature of your water heater, the more electrical energy it has to use to give for the amount of heating demanded by the user. Even with a lower temperature, it is still possible for you to have a lovely shower since the water you use is still heated.

3. Flushing of the Water Tank Often

Occasional flushing of the tank prevents build-up inside. Build-ups can come in the form of sediment accumulation. As the build-up become thicker and thicker, more energy is needed to heat the water since the build-up sucks away all the insulation that is intended for the water. As a solution, removing the build-up inside the pipe will be efficient to lessen the energy usage.

4. Fix Leaks Immediately

Leaks and crack in the water heating source can be saved and therefore energy saving is made effective. The same is true to pipes and running water, taps and showerheads. This practice help homeowners divert from wasting too much energy that is not used properly.

5. Insulation for Tanks and Pipes

Heating costs can also be lowered through insulation of water heaters. This helps to prevent spreading heat across the areas that have low temperature. This prevents the heating areas that are otherwise unneeded. Wrap your storage tanks and pipes connected to and from it with insulators. Insulator wraps can be found in your local hardware stores.